> Downloads | Contact | News | Search | Sitemap | About Fischer Amps | International Sales Partners <

Hard-Wired In Ear Belt Pack

Hard-wired headphone amp body pack for those musicians whose instrument restrict their freedom of movement (keyboards, drums, percussions, background vocals). Our original.


  • Two direct symmetric XLR inputs (no special cable required)
  • Much better sound than wireless in ear systems
  • Switch-over from stereo to mono-mix mode
  • 2 x 40mW power with limiter
  • Control for volume and pan/mix
  • Sturdy aluminium case, holder of stainless steel
  • Mains connector (lockable) for plugging in an external DC mains adapter (optional extra)
  • Power supply with 9V block battery.
  • Hours of operation with alkaline battery approx. 12h, with rechargeable battery approx. 8h.


Dimensions L x W x H (in mm): 127 x 82 x 30
Weight: 290 g
Input connectors: 2 x Neutrik XLR jack 3-pole, with interlock
Earphone connector: 1/8" mini connector
Frequency response: 30 Hz - 20 KHz +/- 2 dB
Minimum impedance of earphones: 12 ohms per side
Input impedance: 15kohms
Nom. input level: 0dB - +4dB (limiter at +5dB)
Nom. input level symetric: 0 dBV
Max. Einput level symmetric: +4 dBV
Limit input level symmetric: +5 dBV
Max output power at 20 ohms: 40 mW per channel
Max. operating current: 40 mA
Power supply: 9V block alkaline battery or 8.4V rechargeable battery NiMH
DC-input plug: ext. input power DC 9V (pin +, ring -)
Operating time of battery: approx. 8h with 270mAh rechargeable battery, approx. 12h with alkaline battery (depends on headphones volume)

Operating Manual



What's related?

  • In Ear Body Pack XL (plus an additional Mic-In to add-on a microphone signal to the stereo or mono mix received)

Copyright © 2004-2018 Fischer Amps | Sprache: Deutsch  / English | Last update: 14. November 2011 11:51:39 h